Free tool · No sign-up · Nothing uploaded

Home Energy Loss Self-Check — Where Is Your House Losing Money?

Most homes lose money in the same five places: drafts, insulation, heating and cooling, windows and doors, and hot water. Enter your last 3 months of bills, tick what you honestly notice at home, and this tool ranks the five areas for you — so the cheap fix comes before the expensive one. Everything runs in your browser: nothing you type is uploaded.

1. Your home

Optional — used only to label your printed summary. Leave it blank and the check still works.

2. Your last 3 months of bills

Copy the usage and cost from each bill — the pattern across 3 months says more than any single month. No gas service? Leave the gas column blank; that is useful information too. Cover account numbers if you ever share bills — this tool never asks for them.

Month
Electricity — kWh / $
Gas — units / $
Enter at least one month of costs and a plain summary of your 3 months will appear here.

Reading the pattern: a cost that climbs while usage stays flat usually points to rates, not the house. Usage that spikes in the hottest or coldest month usually points to heating and cooling working through drafts and thin insulation first — which is why the fix order below starts with sealing, not equipment.

Your 15 checks

Tick only what you honestly notice. “Not sure” is a real answer — leave it unticked and note it below; a full audit works from your photos exactly on the points you cannot judge yourself.

0 of 15 checks flagged

3. Drafts and air leaks

Conditioned air leaving through gaps is money leaving with it — and it makes heating and cooling run longer in every season.

  • Hold a hand or a tissue near frames and exterior-wall outlets. Movement you can feel is a leak you can usually seal cheaply.
  • Uneven rooms often mean air is escaping (or ducts are leaking) on the way there — not that the system is too small.
  • Seals are wear items. If they have never been replaced, treat this as flagged.

4. Insulation gaps

Insulation slows heat moving through ceilings and walls. Gaps undo it in patches, and the heating system pays for every patch.

  • Only look where you can reach safely. A photo of what you see is enough for a desk audit — do not climb where you are not safe.
  • Patchy melt is heat escaping unevenly through the roof — a classic insulation and air-leak signature.
  • Cold surfaces are where the house is losing heat fastest — and where condensation and discomfort start.

5. Heating and cooling

The biggest energy line in most homes — and the one most often “fixed” by selling new equipment before the basics are checked.

  • Both patterns waste money. Constant running often traces back to leaks and insulation above; short cycling is a service question.
  • The cheapest performance fix in the house. Note the date of the last change or service in your summary.
  • Age alone is not a verdict — but age plus the flags above is where a planned replacement beats an emergency one. Closed vents do not save money; they strain the system.

6. Windows and doors

Windows get blamed first and replaced first — usually before the cheaper frame and seal problems are even looked at.

  • Fog between panes means the sealed unit has failed. Rot means water has been getting in — fix the water path, not just the paint.
  • Daylight around a door is a hole in the house you can see. Latches, sweeps and strike plates are small money.
  • You do not have to replace them to lose less: fitted shades and storm panels cut the loss while you plan.

7. Hot water and appliances

The quiet, year-round load: it runs in every month, so small waste here repeats twelve times a year.

  • Check the dial — many heaters ship set higher than a home needs. Bare hot pipes are heat you paid for, warming a basement.
  • A hot drip wastes the water and the energy that heated it, around the clock.
  • A spare fridge is a full-time appliance for part-time use. Cold washes clean most loads and remove the heating cost entirely.

8. Your ranked fix-first list

Areas are ranked by how many checks you flagged in each. The order matters more than the list: sealing and basics first, equipment and windows last — that is the order a full audit report uses too.

  1. Tick the checks above and your ranked list will appear here.

Privacy: this tool runs 100% in your browser. The bills, address and notes you enter are never sent to, or stored on, our servers — reload the page and they are gone. Printing uses your own browser’s print / save-as-PDF. The example button fills clearly labelled sample data so you can see how the summary looks — it is not a real home or a customer case.

How to use this self-check

Start with the bills, not the house. Three months side by side tell you whether the problem is seasonal (usage spikes with the weather — think drafts, insulation and the heating system working through both) or constant (a high flat line in every month — think hot water, appliances and always-on loads). Then walk the 15 checks room by room and tick only what you truly notice.

The result is a ranking, not a diagnosis. It tells you which area to look at first and what the sensible first fix in that area is. It cannot see inside walls, measure airflow, or read the pattern in your bills the way a person working from your bills and photos can — and it will never tell you a savings number, because no honest check can before the fixes exist.

What not to buy yet: new windows and a new heating system are the two most expensive answers in home energy — and the two most commonly sold before sealing, insulation and service basics are done. If a quote arrives before anyone has asked about your weatherstripping, your filter or your attic hatch, that order is backwards.

Want the full audit — your bills and photos, read together?

The Home Energy Audit takes the next step this tool cannot: you send your last 3 months of electricity and gas bills plus photos of your home, and receive one plain-English report — where the money is going, the fix order that makes sense for your home, and what not to buy yet. Before you send anything, cover or black out utility account numbers and personal details — the audit needs usage and cost, not account numbers.

One-time payment · No recurring charges · 30-day refund policy. The report is general information based on the bills and photos you send; it does not replace an in-person inspection or a licensed energy audit, and it does not guarantee savings.

Frequently asked questions

Is this self-check really free?

Yes. No account, no email form, no limit — and it runs entirely in your browser, so nothing you type ever leaves your device.

Does this replace a full Home Energy Audit?

No. This tool ranks what you flag yourself. The full audit is prepared from your actual bills and photos, reads the two together, and gives a fix order for your specific home — including the points you marked “not sure” here.

Why does the fix order start with sealing?

Because every later fix works better in a sealed house. New equipment heating a leaky home runs longer and costs more to run, whatever its rating — public ENERGY STAR and Department of Energy guidance puts sealing and insulation ahead of equipment for the same reason.

Will this tell me how much I will save?

No. It ranks where to look first. Savings depend on the fixes you make, your home, your weather and your rates — anyone who guarantees a number before seeing the home is guessing.

Is this a licensed or official audit?

No. It is general information based on public guidance. If a lender, utility or rebate program requires a certified audit, they will ask for an on-site one.

AddressRiskReport is an independent service. It is not affiliated with or endorsed by ENERGY STAR, the U.S. Environmental Protection Agency, or the U.S. Department of Energy. This tool is general information for your own decision-making and does not replace an in-person inspection or a licensed energy audit. Questions: contact@addressriskreport.com · Portland, OR.