The short answer
Split every bill into usage and rate first. Write down, for each of the last 3 months: the units used (kWh for electricity, therms or CCF for gas), the total cost, and the number of days in the billing cycle. Then divide: cost ÷ units gives you the effective price per unit; units ÷ days gives you real daily use.
If the dollars rose but daily use stayed flat, the price changed — a rate rise, a new fee, or a longer cycle. Your house did not suddenly get worse. If daily use rose, the house or the weather changed — and the pattern across the 3 months tells you where to look first.
Do this before anyone quotes you windows or equipment. The most expensive fixes are the ones most often sold to people whose real problem was a cheap leak — or no house problem at all.
Step 1: Pull the five numbers that matter
Most people read only the total due. The useful numbers sit one layer down, on the usage panel of the bill:
- Units used — kWh for electricity; therms, CCF or MCF for gas. This is the house’s behaviour.
- Total cost for those units — including delivery charges, fees and taxes, not just the energy line.
- Days in the billing cycle — cycles run roughly 28 to 35 days. A 35-day month looks “high” next to a 28-day month even at identical daily use.
- Actual or estimated reading? An estimated month followed by an actual reading can dump two months of correction into one bill.
- The same figures for gas, if the home uses it — heating problems often show in gas first while the electric bill barely moves, or the other way round.
With those five numbers for 3 months, you can compute the only two figures that diagnose anything: cost per unit and units per day.
Step 2: Read the pattern, not the total
| What the 3 months show | What it usually points to | First move |
|---|---|---|
| Dollars up, units per day flat | The price changed: a rate increase, a seasonal rate schedule, a new fee — or a longer billing cycle. | Call the utility and ask what changed in the tariff. No home repair fixes a price. |
| Units spike in the coldest or hottest month only | Heating or cooling load following the weather — normal in shape, possibly expensive in size. | Check the cheap losses first: drafts, attic insulation gaps, filter and thermostat basics. |
| Units high in every month, even mild ones | An always-on load: water heating, an old second fridge, a failing appliance, a pump that never stops, space heaters doing quiet overtime. | List everything that runs 24/7 and test suspects one at a time before replacing anything big. |
| One wild month, then back to normal | An estimated-reading correction, guests, a project, a leak in a hot-water line — a one-off, not a trend. | Find the one-off cause; do not buy a permanent fix for a temporary event. |
| Gas up, electricity flat (or the reverse) | One system is carrying a problem the other does not share — often the heating system or the water heater. | Look at that one system first instead of treating the whole house. |
Two honest limits of bill-reading itself: bills show pattern, not cause — they cannot see a torn duct or a failed door seal. And weather moves honest bills a lot: compare with the same month last year whenever the utility prints that history, not just with last month.
Step 3: Match the pattern to the five loss areas
When usage really is the problem, a house loses energy money in five usual places. In the order they are cheapest to check:
- Drafts and air leaks — gaps around doors, attic hatches, pipes and recessed lights. Cheap to seal, expensive to ignore, because every other system works harder through them.
- Insulation gaps — thin or missing attic insulation and uninsulated crawl spaces show up as heating and cooling that never quite catches up.
- Heating and cooling — clogged filters, neglected service and thermostat habits can raise use in every season, not just the extreme ones.
- Windows and doors — real losses when seals have failed, but usually not the first or biggest loss — despite being the first thing sold.
- Hot water and appliances — an ageing water heater, long pipe runs and always-on appliances build the flat, season-independent part of the bill.
This fix order — sealing and basics before equipment — follows the public guidance of ENERGY STAR and the U.S. Department of Energy. This site is independent and is not affiliated with or endorsed by either.
5 mistakes that make a high bill misleading
- Comparing dollars instead of usage. Dollars mix your house, the weather and the tariff into one number. Only the usage half is about your house.
- Judging by one month. One month cannot separate a spike from a trend — and a single estimated reading can fake both.
- Ignoring the cycle length. A 35-day bill next to a 28-day bill looks like a 25% jump that never happened.
- Buying the expensive fix first. New windows and a new heating system are the biggest tickets in home energy. Sold before sealing and insulation are checked, they routinely disappoint — the leaks stay.
- Trusting a guaranteed savings number. No one who has not seen your bills and your home can honestly promise a savings figure. Treat any such promise as a sales technique, not a measurement.
The 8-point summary
- Pull units, cost and cycle days for the last 3 months — electricity and gas.
- Compute cost per unit and units per day for each month.
- Dollars up with flat daily use = price problem, not a house problem.
- Daily use up only in extreme weather = heating/cooling load; check cheap losses first.
- Daily use up in every month = hunt the always-on load.
- Compare with the same month last year, not just last month.
- Fix in order: drafts → insulation → system basics → windows → equipment.
- Let bills rank where to look; let an inspection confirm the actual fault.
Want to run this on your own numbers right now? Our free Home Energy Loss Self-Check takes the same 3 months of bills, walks you through 15 checks in the 5 loss areas, and ranks your fix-first list — entirely in your browser; nothing you type is sent anywhere.
Want a second pair of eyes on your bills and photos?
The Home Energy Audit is a desk audit: you send 3 months of electricity bills (and gas bills, if your home uses gas) plus photos of your home, and get back one plain-English report — where the house most likely loses money across the 5 areas, what your bill pattern points to, the fix order that makes sense, and what not to buy yet. No visit, no account. Cover or black out your account numbers before you send anything — only usage and cost per month are needed.
One-time payment · No recurring charges · 30-day refund policy. The audit is general information based on the bills and photos you send. It does not replace an in-person inspection or a licensed energy audit, and it does not guarantee savings — it shows you where to look first, and in what order, before you spend on repairs or upgrades.
Frequently asked questions
Why did my electric bill suddenly go up when nothing changed?
Separate usage from rate. If the dollars rose but kWh per day stayed flat, the price changed — a rate rise, a fee, or a longer cycle. If usage rose, compare with the same month last year, and check for an estimated reading being corrected.
How many months of bills do I need to see a pattern?
Three months is the practical minimum: enough to separate a one-off spike from a trend, for both usage and cost.
Should I compare this month with last month?
Compare units per day, and the same month last year when you can. Cycle lengths vary by a week, and weather moves heating and cooling use even in an unchanged house.
What is the first fix when a bill is high?
Usually the cheap losses: drafts and air leaks, insulation gaps, filter and thermostat basics. ENERGY STAR and Department of Energy guidance puts sealing and insulation ahead of equipment — and ahead of windows.
Can reading my bills tell me exactly what is wrong?
No. Bills show the pattern and rank where to look first. A specific fault — a duct leak, a dying appliance — needs eyes on the home, or a licensed audit with measurements.
What is a desk energy audit?
A written report prepared from your recent bills and photos of your home: the likely loss areas, ranked, with a fix-first order. Ours is $29 one-time, by email, with a 30-day refund policy — general information, not a licensed audit, and no savings guarantee.
This guide is general information. It is not an inspection, a licensed or certified energy audit, or utility, legal or financial advice, and it does not guarantee savings. Fix order follows public guidance from ENERGY STAR and the U.S. Department of Energy; AddressRiskReport is an independent service, not affiliated with or endorsed by ENERGY STAR, the U.S. Environmental Protection Agency, or the U.S. Department of Energy. Questions: contact@addressriskreport.com · Portland, OR.